Estudio de la resistencia a la abrasión de capas vitrocerámicas depositadas sobre acero

  1. Gómez de Salazar, José María 1
  2. Barrena Pérez, María Isabel 1
  3. Soria, A. 1
  4. Menéndez Sastre, Miguel Alejandro 1
  5. González Benavente-García, Alberto 1
  1. 1 Universidad Complutense de Madrid
    info

    Universidad Complutense de Madrid

    Madrid, España

    ROR 02p0gd045

Zeitschrift:
Boletín de la Sociedad Española de Cerámica y Vidrio

ISSN: 0366-3175

Datum der Publikation: 2002

Ausgabe: 41

Nummer: 6

Seiten: 525-529

Art: Artikel

DOI: 10.3989/CYV.2002.V41.I6.658 DIALNET GOOGLE SCHOLAR lock_openOpen Access editor

Andere Publikationen in: Boletín de la Sociedad Española de Cerámica y Vidrio

Zusammenfassung

Wear test has been completed on two types of layered materials: a non-reinforced enamel plate and a ceramic reinforced enamel plate. The latter has been tested in two forms: with 10 wt. % and 20 wt. % ceramic particles reinforcement. For comparison the same test has also been completed on polished steel. Wear resistance was measure using a tribometer, equipped with a chromium steel sphere of 6 mm diameter. The sphere-plate surface contact area increases with distance covered, which in the polished steel provokes exponential increments in wear values. This exponential behaviour was not observed in the enamel plates due to their greater wear resistance. The reinforcement of the enamel plates with ceramic particles increases the wear resistance. A higher percentage of ceramic reinforcement results in a greater wear resistance of the plates.

€ Finanzierung ansehen

Informationen zur Finanzierung

Agradecimiento al Proyecto: CAM 07N/0038/98.

Geldgeber

Bibliographische Referenzen

  • E.A. Mari, “Los Materiales Cerámicos”, Librería y Editorial Alsina, Buenos Aires, (1998).
  • J.M. Rincón, J. Cardá y J. Alarcón, “Nuevos productos y tecnologías de esmaltes y pigmentos cerámicos”, Editorial Faenza Editrice Ibérica SL, Castellón, (1992).
  • A.I. Andrews, “Porcelain Enamels”, Second Edition, The Garrad Press Publishers, Champaign, Illinois, (1961).
  • R.A. Eppler, “ Glasses science and technology”, Vol I, Editorial D.R. Uhlmann and N.J. Kridl, Academic Press, New York, 301-338, (1983).
  • Norma ASTM G99-90: “Standard Test method for Wear testing with a Pinon-Disk Apparatus”, ASTM Standards, (1990).
  • Norma UNE ENV 843-4: “Cerámicas Técnicas Avanzadas. Cerámicas Monolíticas. Propiedades mecánicas a Temperatura ambiente. Parte 4: Ensayo de dureza Vickers, Knoop y Rockwell superficial”, AENOR, (1995).
  • G.R. Anstis, P. Chantikul, B.R. Lawn and D.B. Marshall, “A critical evaluation of indentation techniques for measuring fracture toughness: I, Direct crack measurements”, J. Am. Ceram. Soc., 64, 533-538, (1981).
  • R.F. Cook, G.M. Pharr, “Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics”, J. Am. Ceram. Soc., 73 (4), 787-817, (1990).
  • “Surface cleaning, finishing and coating. Ceramic Coating”, Metals Handbook, Ninth Edition, Vol. 5, Edit. AMS, Metal Park, Ohio, USA, (1982).
  • “Refuerzo de materiales vítreos para su uso en aplicaciones tradicionales” Tesis Doctoral de Dña. Esther Ocaña García (Instituto de Cerámica y Vidrio – CSIC) presentada en la Universidad Autónoma de Madrid, Madrid (2000).
Fuente de los datos: Dialnet