Publicacións (69) Publicacións de VICENTE ISMAEL ÁGUEDA MATÉ

2024

  1. Drinking Water Electrochlorination in a Single-Pass Biomimetic Flow Cell with Zero Salt Dosing

    ACS Sustainable Chemistry and Engineering, Vol. 12, Núm. 8, pp. 3130-3141

  2. Synthetic natural gas production through biogas methanation using a sorption-enhanced reaction process

    Separation and Purification Technology, Vol. 331

2023

  1. CO2 methanation enhanced with a cyclic SERP process using a commercial Ni-based catalyst mixed with 3A zeolite as adsorbent

    Chemical Engineering Journal, Vol. 461

  2. Extraction of pharmaceuticals from hospital wastewater with eutectic solvents and terpenoids: Computational, experimental, and simulation studies

    Chemical Engineering Journal, Vol. 451

  3. Hydrodynamic behavior of a novel 3D-printed nature-inspired microreactor with a high length-to-surface ratio

    Chemical Engineering Journal Advances, Vol. 13

  4. Imines supported on silica as CO2 capture selective adsorbents

    Chemical Engineering Research and Design, Vol. 194, pp. 573-581

  5. Influence of sodium and potassium proportion on the adsorption of methanol and water on LTA zeolites at high temperature

    Microporous and Mesoporous Materials, Vol. 360

  6. Mass transfer enhancement in electrochemical flow cells through 3D-printed biomimetic channels

    Reaction Chemistry and Engineering, Vol. 8, Núm. 7, pp. 1776-1784

  7. Revision of the Most Harmful Organic Compounds Present in Sewage and Sludge

    Handbook of Environmental Chemistry (Springer Science and Business Media Deutschland GmbH), pp. 189-208

2022

  1. 3D printing of powdered activated carbon monoliths: Effect of structuring on physicochemical and mechanical properties and its influence on the adsorption performance

    Materials Today Communications, Vol. 33

  2. Extraction of antibiotics identified in the EU Watch List 2020 from hospital wastewater using hydrophobic eutectic solvents and terpenoids

    Separation and Purification Technology, Vol. 282

  3. Recovery of a Succinic, Formic, and Acetic Acid Mixture from a Model Fermentation Broth by Simulated Moving Bed Adsorption with Methanol as a Desorbent

    Industrial and Engineering Chemistry Research, Vol. 61, Núm. 1, pp. 672-683

2021

  1. Application of sludge-based activated carbons for the effective adsorption of neonicotinoid pesticides

    Applied Sciences (Switzerland), Vol. 11, Núm. 7

  2. Effective adsorption of the endocrine disruptor compound bisphenol a from water on surface-modified carbon materials

    Applied Surface Science, Vol. 552

  3. Effective removal of naproxen from aqueous solutions by CWAO process using noble metals supported on carbon nanospheres catalysts

    Separation and Purification Technology, Vol. 259

  4. Efficient recovery of syngas from dry methane reforming product by a dual pressure swing adsorption process

    International Journal of Hydrogen Energy, Vol. 46, Núm. 33, pp. 17522-17533

  5. Erratum to “Lab at home: 3D printed and low-cost experiments for thermal engineering and separation processes in COVID-19 time” [Educ. Chem. Eng. 36 (2021) 24–37](S1749772821000154)(10.1016/j.ece.2021.02.001)

    Education for Chemical Engineers

  6. Extractive removal and recovery of bisphenol A from aqueous solutions using terpenoids and hydrophobic eutectic solvents

    Journal of Environmental Chemical Engineering, Vol. 9, Núm. 5

  7. Improvement of methanol production from carbon dioxide and hydrogen by a sorption enhanced reaction process

    Chemical Engineering Transactions, Vol. 86, pp. 1081-1086

  8. Lab at home: 3D printed and low-cost experiments for thermal engineering and separation processes in COVID-19 time

    Education for Chemical Engineers, Vol. 36, pp. 24-37