Argitalpenak (202) FRANCISCO JAVIER PÉREZ TRUJILLO argitalpenak

2024

  1. Comparative environmental assessment of coated ferritic steels suited to steam turbines of coal-fired supercritical and ultra-supercritical power plants

    Journal of Cleaner Production, Vol. 443

  2. Perspectives on Solar Salt-Based Nanofluids Used in Concentrated Solar Power Plants

    Solar RRL

2023

  1. Basis for calculation the residual mechanical properties of corroding bars

    Structural Concrete, Vol. 24, Núm. 1, pp. 257-268

  2. Electrochemical Impedance Analysis for Corrosion Rate Monitoring of Sol–Gel Protective Coatings in Contact with Nitrate Molten Salts for CSP Applications

    Materials, Vol. 16, Núm. 2

  3. Evaluation of the environmental impacts and economical study of Solar Salt in CSP-parabolic trough technology

    Materials at High Temperatures, Vol. 40, Núm. 4, pp. 331-337

  4. Temperature dependence of high-temperature corrosion on nickel-based alloy in molten carbonates for concentrated solar power applications

    Corrosion Science, Vol. 220

  5. The effect of microstructure evolution on the wear behavior of tantalum processed by Indirect Extrusion Angular Pressing

    International Journal of Refractory Metals and Hard Materials, Vol. 111

  6. Thermogravimetry-mass spectrometry studies in coating design for supercritical steam turbines

    Protective Systems for High Temperature Applications EFC 57: From Theory to Industrial Implementation (CRC Press), pp. 84-93

  7. Waste incineration corrosion processes: Oxidation mechanisms by electrochemical impedance spectroscopy

    Protective Systems for High Temperature Applications EFC 57: From Theory to Industrial Implementation (CRC Press), pp. 299-309

  8. Zirconia-based coatings for the protection of ferritic-martensitic steels in a molten salt environment for CSP technology

    Journal of Sol-Gel Science and Technology, Vol. 106, Núm. 3, pp. 816-826

2022

  1. Comparison between pilot and lab scale testing of aluminide coated and uncoated ferritic steels under oxy-fuel and coal/thistle co-firing conditions

    Surface and Coatings Technology, Vol. 450

  2. Computational modelling of the local structure and thermophysical properties of ternary MgCl2-NaCl-KCl salt for thermal energy storage applications

    International Journal of Heat and Mass Transfer, Vol. 196

  3. Corrosion study of Ni-based alloy in ternary chloride salt for thermal storage application

    Corrosion Science, Vol. 208

  4. Experimental study on steam oxidation resistance at 600 °C of Inconel 625 coatings deposited by HVOF and laser cladding

    Surface and Coatings Technology, Vol. 451

  5. Past research and future strategies for molten chlorides application in concentrated solar power technology

    Solar Energy Materials and Solar Cells, Vol. 237

  6. RAISELIFE project extends the lifetime of functional CSP materials

    AIP Conference Proceedings

  7. Temperature effect and alloying elements impact on the corrosion behaviour of the alloys exposed to molten carbonate environments for CSP application

    Corrosion Science, Vol. 201

  8. Thermogravimetric analysis-mass spectrometry study of steam oxidation resistance of HCM12A steel at 650°C and 700°C

    Corrosion Engineering Science and Technology, Vol. 57, Núm. 3, pp. 223-231

2021

  1. Corrosion monitoring of 321H in contact with a quaternary molten salt for parabolic trough CSP plants

    Corrosion Science, Vol. 178

  2. Insights into the role of the layer architecture of Cr–Ti–N based coatings in long-term high temperature oxidation experiments in steam atmosphere

    Ceramics International, Vol. 47, Núm. 3, pp. 4257-4266