Publicaciones (73) Publicaciones de JOSÉ ANTONIO DELGADO DOBLADEZ

2024

  1. Synthetic natural gas production through biogas methanation using a sorption-enhanced reaction process

    Separation and Purification Technology, Vol. 331

2023

  1. CO2 methanation enhanced with a cyclic SERP process using a commercial Ni-based catalyst mixed with 3A zeolite as adsorbent

    Chemical Engineering Journal, Vol. 461

  2. Imines supported on silica as CO2 capture selective adsorbents

    Chemical Engineering Research and Design, Vol. 194, pp. 573-581

  3. Influence of sodium and potassium proportion on the adsorption of methanol and water on LTA zeolites at high temperature

    Microporous and Mesoporous Materials, Vol. 360

  4. The potential of a natural Ecuadorian mordenite-type zeolite for batch and column selenium removal

    Separation Science and Technology (Philadelphia), Vol. 58, Núm. 13, pp. 2286-2297

2022

  1. Recovery of a Succinic, Formic, and Acetic Acid Mixture from a Model Fermentation Broth by Simulated Moving Bed Adsorption with Methanol as a Desorbent

    Industrial and Engineering Chemistry Research, Vol. 61, Núm. 1, pp. 672-683

2021

  1. Effective adsorption of the endocrine disruptor compound bisphenol a from water on surface-modified carbon materials

    Applied Surface Science, Vol. 552

  2. Erratum to “Lab at home: 3D printed and low-cost experiments for thermal engineering and separation processes in COVID-19 time” [Educ. Chem. Eng. 36 (2021) 24–37](S1749772821000154)(10.1016/j.ece.2021.02.001)

    Education for Chemical Engineers

  3. Improvement of methanol production from carbon dioxide and hydrogen by a sorption enhanced reaction process

    Chemical Engineering Transactions, Vol. 86, pp. 1081-1086

  4. Lab at home: 3D printed and low-cost experiments for thermal engineering and separation processes in COVID-19 time

    Education for Chemical Engineers, Vol. 36, pp. 24-37

  5. Naproxen removal by CWPO with Fe3O4/multi-walled carbon nanotubes in a fixed-bed reactor

    Journal of Environmental Chemical Engineering, Vol. 9, Núm. 2

  6. Potential of CO2 capture from flue gases by physicochemical and biological methods: A comparative study

    Chemical Engineering Journal, Vol. 417

  7. Synthesis of Zeolite-Templated Carbonaceous Materials Doped With Nitrogen for Carbon Dioxide Adsorption

    Water, Air, and Soil Pollution, Vol. 232, Núm. 7

2020

  1. Enhanced removal of the endocrine disruptor compound Bisphenol A by adsorption onto green-carbon materials. Effect of real effluents on the adsorption process

    Journal of Environmental Management, Vol. 266

  2. Modelling of the separation of long-chain normal paraffins from kerosene in a simulated moving bed process: effect of the desorbent

    Adsorption, Vol. 26, Núm. 2, pp. 317-327

  3. New insights from modelling and estimation of mass transfer parameters in fixed-bed adsorption of Bisphenol A onto carbon materials

    Journal of Contaminant Hydrology, Vol. 228

2019

  1. Comparison between MOF UTSA-16 and BPL activated carbon in hydrogen purification by PSA

    Chemical Engineering Journal, Vol. 355, pp. 279-289

  2. Insights into the removal of Bisphenol A by catalytic wet air oxidation upon carbon nanospheres-based catalysts: Key operating parameters, degradation intermediates and reaction pathway

    Applied Surface Science, Vol. 473, pp. 726-737

  3. Multicomponent adsorption of H2, CH4, CO and CO2 in zeolites NaX, CaX and MgX. Evaluation of performance in PSA cycles for hydrogen purification

    Microporous and Mesoporous Materials, Vol. 286, pp. 187-198

  4. Optimization parameters, kinetics and mechanism of naproxen removal by catalytic wet peroxide oxidation with a hybrid iron-based magnetic catalyst

    Catalysts, Vol. 9, Núm. 3