Ingeniería Química y de Materiales
Departamento
Universidad Rey Juan Carlos
Madrid, EspañaPublicaciones en colaboración con investigadores/as de Universidad Rey Juan Carlos (42)
2024
-
Plasma electrolytic oxidation of AZ31 magnesium stents for degradation rate control
Surface and Coatings Technology, Vol. 479
2023
-
Evaluation of the adsorptive and catalytic properties of sludge-based carbon materials for the efficient removal of antibiotics listed in the European Decision 2020/1161/EU
Journal of Environmental Chemical Engineering, Vol. 11, Núm. 5
2022
-
Critical review of technologies for the on-site treatment of hospital wastewater: From conventional to combined advanced processes
Journal of Environmental Management, Vol. 320
2021
-
A comparative study among catalytic wet air oxidation, Fenton, and Photo-Fenton technologies for the on-site treatment of hospital wastewater
Journal of Environmental Management, Vol. 290
-
Anticorrosion and Cytocompatibility Assessment of Graphene-Doped Hybrid Silica and Plasma Electrolytic Oxidation Coatings for Biomedical Applications
ACS Biomaterials Science and Engineering, Vol. 7, Núm. 12, pp. 5861-5877
-
Arsenate and arsenite sorption using biogenic iron compounds: Treatment of real polluted waters in batch and continuous systems
Metals, Vol. 11, Núm. 10
-
Batch and continuous chromate and zinc sorption from electroplating effluents using biogenic iron precipitates
Minerals, Vol. 11, Núm. 4
-
Biohydrometallurgy for rare earth elements recovery from industrial wastes
Molecules, Vol. 26, Núm. 20
-
Hard Anodizing and Plasma Electrolytic Oxidation of an Additively Manufactured Al-Si alloy
Surface and Coatings Technology, Vol. 420
-
Leaching/bioleaching and recovery of metals
Metals
-
The effect of metal ions on the growth and ferrous iron oxidation by leptospirillum ferriphilum cc isolated from armenia mine sites
Metals, Vol. 11, Núm. 3, pp. 1-13
-
Xerotolerance: a new property in exiguobacterium genus
Microorganisms, Vol. 9, Núm. 12
2020
-
Mg–1Zn–1Ca alloy for biomedical applications. Influence of the secondary phases on the mechanical and corrosion behaviour
Journal of Alloys and Compounds, Vol. 831
-
PLA deposition on surface treated magnesium alloy: Adhesion, toughness and corrosion behaviour
Surface and Coatings Technology, Vol. 388
2014
-
Treatment of a wastewater from a pesticide manufacture by combined coagulation and Fenton oxidation
Environmental Science and Pollution Research, Vol. 21, Núm. 21, pp. 12129-12134
2009
-
Corrosion behavior of Mg-Al alloys with aluminum thermal spray coatings in humid and saline environments
Corrosion
-
Corrosion protection of Mg/Al alloys by thermal sprayed aluminium coatings
Applied Surface Science, Vol. 255, Núm. 15, pp. 6968-6977
-
Face tracking using skin detection and parallel kernel based methods
ACM SIGGRAPH ASIA 2009 Posters, SIGGRAPH ASIA '09
-
Routine to estimate composition of concentrated metal-nitric-hydrofluoric acid pickle liquors
Hydrometallurgy, Vol. 96, Núm. 1-2, pp. 88-94
2008
-
Determination of iron and chromium fluorides solubility for the treatment of wastes from stainless steel mills
Chemical Engineering Journal, Vol. 136, Núm. 2-3, pp. 116-125