Ingeniería Química y de Materiales

2023

1. Advances on Cellulose Manufacture in Biphasic Reaction Media

   International Journal of Molecular Sciences, Vol. 24, Núm. 15

2. An overview process analysis of the aromatic-aliphatic separation by liquid–liquid extraction with ionic liquids

   Separation and Purification Technology, Vol. 316

3. Application of Anodic Titanium Oxide Modified with Silver Nanoparticles as a Substrate for Surface-Enhanced Raman Spectroscopy

   Materials, Vol. 16, Núm. 16

4. Application of residual neural networks to detect and quantify milk adulterations

   Journal of Food Composition and Analysis, Vol. 122

5. Arundo donax L Processing in Catalyzed Butanol–Water Media in the Scope of Lignocellulose Biorefineries

   Polymers, Vol. 15, Núm. 6

6. As-cast and extruded Mg–Zn–Ca systems for biodegradable implants: Characterization and corrosion behavior

   Journal of Magnesium and Alloys, Vol. 11, Núm. 3, pp. 1102-1120

7. Assessment of Two Materials as Adsorbents for the Effective Removal and Further Pre-Concentration of Gallium from Aqueous Solutions: Mesoporous Carbon vs. Clinoptilolite

   Separations, Vol. 10, Núm. 6

8. Basis for calculation the residual mechanical properties of corroding bars

   Structural Concrete, Vol. 24, Núm. 1, pp. 257-268

9. Bioleaching of Sulfide Minerals by Leptospirillum ferriphilum CC from Polymetallic Mine (Armenia)

   Minerals, Vol. 13, Núm. 2

10. Biological Performance of Duplex PEO + CNT/PCL Coating on AZ31B Mg Alloy for Orthopedic and Dental Applications

    Journal of Functional Biomaterials, Vol. 14, Núm. 9

11. Bioproduction of succinic acid from potato waste. Kinetic modeling

    Industrial Crops and Products, Vol. 203

12. Biorecovery of rare earth elements from fluorescent lamp powder using the fungus Aspergillus niger in batch and semicontinuous systems

    Minerals Engineering, Vol. 201

13. CO2 methanation enhanced with a cyclic SERP process using a commercial Ni-based catalyst mixed with 3A zeolite as adsorbent

    Chemical Engineering Journal, Vol. 461

14. Ciprofloxacin Release and Corrosion Behaviour of a Hybrid PEO/PCL Coating on Mg3Zn0.4Ca Alloy

    Journal of Functional Biomaterials, Vol. 14, Núm. 2

15. Comprehensive study of acute toxicity using Microtox® bioassay in soils contaminated by lindane wastes

    Science of the Total Environment, Vol. 856

16. Continuous-flow titration of low iron doses to promote photo-Fenton and photo-Fenton-like processes at neutral pH

    Chemical Engineering Journal, Vol. 476

17. Cyclic carbonates as solvents in the dearomatization of refinery streams: Experimental liquid–liquid equilibria, modelling, and simulation

    Journal of Molecular Liquids, Vol. 380

18. Deep quantification of a refined adulterant blended into pure avocado oil

    Food Chemistry, Vol. 404

19. Degradation of Lindane by persulfate/ferrioxalate/solar light process: Influential operating parameters, kinetic model and by-products

    Applied Catalysis B: Environmental, Vol. 324

20. Detectability of Thermomechanical Surface Damages on Quenched and Tempered, Nitrided and Case-Hardened Steels by Barkhausen Noise Analysis

    HTM - Journal of Heat Treatment and Materials, Vol. 78, Núm. 1, pp. 32-48